The Air Frame X-30 is a key product in Rigtec’s range of Projector Rigging Solutions; it offers a simple and reliable solution for stacking and hanging projectors. With interlocking spigots, the frames can simply be stacked on top of each other and locked into position without the need for any additional accessories. The frames can be flown individually in one of three orientations or in a stacked configuration, by attaching an optional Atom Grip Flying Adapter. The Rental Frame can hold projectors up to 50kg and can support a maximum hanging load of 100kg.
Extra Creativity with Additional Rigging Points
The Air Frame X-30 brings extra creativity to any projection project with it’s three mounting positions. All Air Frames now feature three mounting plates for an Atom Grip to be attached, this allows frames to be flown in either Landscape, Portrait or Floor-Projection orientations – with no need for any additional adapters.
Simple Stacking Solution
The Air Frame X-30 provides a simple and reliable stacking solution, the frames simply connect together via the stacking pins and bushes and are locked together quickly by locating the locking pins through the stacking pins. The Air Frame X-30 is completely compatible with the previous version ‘Epson EB-L1000 Series Rental Frame [AMF100280]’, both versions of the frame will stack with each other. The Air Frame X-30 can also be stacked with other third-party rental frames.
Quick and Easy Roll, Pitch & Yaw Adjustments
The Air Frame offers an adjustment system to fine tune projection set ups. There are three controls to operate the adjustments; a left and right ratchet handle at the front of the frame allows the Roll and Pitch of the projector to be adjusted, whilst a single handle at the rear operates the Yaw adjustments.
Offering Added Protection
The Air Frame X-30 offers added protection to your projector, completely surrounding the projector it will help prevent the projector from picking up knocks and scrapes.
Removable Front Bar for use with Ultra Short Throw Lenses
All Rigtec frames feature a removable front bar meaning the projector does not have to be removed from the frame when used with a mirrored ultra short throw lens, like the ELPLX01 and ELPLX02, which projects back over the projector body. The removeable bar allows you to easily install the lens into the projector body. The ELPLX01 and ELPLX02 will project an image without any cropping whilst installed in the Air Frame X-30 as long as the projectors lens shift settings are not set beyond the manufacturer’s recommended limits (The projector will display a warning on screen once settings have been taken outside the recommended limits).
Compatible with a Range of Projectors
The Air Frame X-30 is compatible with a range of Epson & Panasonic Projectors, including the following projectors:
- Epson EB-L1000U
- Epson EB-L1100U
- Epson EB-L1200U
- Epson EB-L1300U
- Epson EB-L1405U
- Epson EB-L1500UH
- Epson EB-L1505UH
- Epson EB-L1715S
- Epson EB-L1750U
- Epson EB-L1755U
- Panasonic PT-MZ670
- Panasonic PT-MW630
- Panasonic PT-MZ570
- Panasonic PT-MW530
- Panasonic PT-MZ770
- Panasonic PT-MW730
Rigtec Frames can be custom built for any projector, so if you can’t see the right frame for your projector, please contact us to find out what options we have available for you.